Variety of sensors

Thies First Class Advanced Anemometer

Measuring of powercurves and site expert’s reports are the prior task for this instrument. This special patented design is the result of long  time experiences. Optimised, dynamic performance also at:

Thies First Class Wind Direction Transmitter

The wind direction transmitter serves for the detection of the horizontal wind direction in the field of meteorology and the technology of environmental protection.

C3 Anemometer by Second Wind

The Second Wind C3 anemometer offers a new choice, including calibrated or uncalibrated anemometers to meet your needs. They are manufactured with material improvements to add durability and reliability.

A100R Anemometer by Vector

A100 Series Anemometers are robustly constructed using weather resisting plastics, anodised aluminium and stainless steels enabling them to withstand continuous exposure to the weather, including marine environments, making them suitable for a wide range of applications where accuracy and sensitivity are important.  

Vector W200P Wind Vane

The W200P Potentiometer Windvane incorporates a precision wire-wound potentiometer as a shaft angle transducer, enabling wind direction sensed by the F20 fin to be accurately determined when connected to suitable measuring equipment, such as a data logger or PLC.

HMP50 Humidity&Temperature Sensor

The Vaisala INTERCAP® Humidity and Temperature Probe HMP50 is a simple and cost effective humidity transmitter suitable for volume applications or integration into other manufacturers'equipment.

SETRA 276 Barometric Pressure Transducer

Setra Systems has been a technology leader in environmental pressure measurement for over three decades. The Model 276 is an extremely accurate and stable transducer based on the proven Setraceram™ sensing element.

SWI Thermistor

The SWI Thermistor is designed specificaly for use with the Nomad 2 data logger. It consists of a 10K type thermistor encased in an aluminum shaft, and comes pre-wired with 3.5 meters of sensor cable.

Radiation Shield Sensor

This six-plate radiation shield minimizes error from gains due to direct sunlight. The shield can be mounted to a 1 to 2 inch diameter pipe with a U-bolt clamp or to a larger diameter tower with a hose clamp.

Shielded Sensor Cable

Type 8723 gauge sensor cable is a durable and economical choice for data logger installations.  

1

Powered by Website backer